Company News

HKTDC Electronics Fair 2016

HKTDC Electronics Fair 2016

    During 13-16/10/2016, Hantek attended Kong Kong Electronics Fair which was held in Hong Kong Convention and Exhibition Center. We showed our new products like HT824 process calibrator, benchtop & hand-held spectrum analyzer, 4 channels PC USB oscilloscope HANTEK6000BC/BD series, wireless PC USB oscilloscope IDSO etc., which was warmly welcomed by visitors from the world.

The star of Hantek’s new products

HT824 - Process Calibrator


  • HT824 multifunctional process calibrator has high accuracy, high stability, can be widely used in site calibration of industry instruments and equipment in laboratory. Powerful functions, it can simulate to output voltage in millivolt and volt, current in milliampere, and many types of electric signals needed by the measurement and control during industry control process. It can also test or simulate kinds of TC and RTD signals.
  • 5 1/2 digit input/output display. 
  • Manual/auto cold junction compensation and setting.
  • The temperature value can be directly measured/output.
  • Auto power off when the voltage of battery is low.
  • Apply advanced built-in battery management system. 7.4V/7800mAh lithium battery, which can easily last for over 8 hours during site measurement work.
  • Auto triangular wave/step wave signal output.
  • It can store 8 sets of measurement and output data, and recall it to display. All the setting value and the function in the last operation can be saved automatically after power-off.
  • The screen shows the connection diagram of probes and plugs to avoid wrong operation. It has backlight.
  • The output has manual/auto step and slope output function. It can arbitrarily set the value of 0%, 25%, 100% in the range of signal output to test the response speed of transmitter. 
  • Application field: measurement and calibration of instruments, maintenance and overhaul of temperature instruments, automatically maintenance and overhaul, project construction debugging, detection and diagnosis of control system signal source, configuration of site instrument repairmen room, matching of the thermal engineering laboratory in electric power industry. 

Copyright (c) 2006 All rights reserved