News

Hantek Lanuch High Cost-Effective DSO5000P Series

Hantek Lanuch High Cost-Effective Digital Storage Oscilloscope DSO5000P Series, the specifications as below:

Features


? 200/100/70MHz bandwidths
?1GSa/s Real Time sample rate
? Large (7.0-inch) color display,WVGA(800x480)

? Record length up to 24K
? Trigger mode: edge/pulse width/line selectable video/slop/overtime etc.
? USB host and device connectivity, standard
? Multiple automatic measurements
? Four math functions, including FFTs standard

? Provides software for PC real-time analysis

 

 Specifications

Model

DSO5202P

DSO5102P

DSO5072P

Bandwidth

200MHz

100MHz

70MHz

Real-time Sample Rate

1GSa/s

Equivalent Sample Rate

25GSa/s

Record Length

24K

SEC/DIV Range

4nS/div-40S/div (in a 2, 4, 8 sequence)

Delay Time Accuracy

500ps

Vertical

A/D Converter

8-bit resolution, each channel sampled simultaneously

VOLTS/DIV Range

2mV/div5V/div at input BNC

Position Range

?50V(5V/div),?40V(2V/div500mV/div),
?2V(200mV/div50mV/div)?400mV(20mV/div2mV/div)

Rise Time at BNC

1.7ns

3.5ns

5ns

DC Gain Accuracy

?4% for Sample or Average acquisition mode, 5mV/div to 2mV/div
?3% for Sample or Average acquisition mode, 5V/div to 10mV/div

Trigger System

Trigger Sensitivity
(Edge Trigger Type)

DC:  1div from DC to 10MHz;1.5div from 10MHz to 100MHz; 2div from 100MHz to 200MHz;
EXT:
200mV from DC to 40MHz
EXT/5:1V from DC to 40MHz
AC: Attenuates signals below 10Hz
HF Reject: Attenuates signals above 80kHz
LF Reject: Attenuates signals below 150kHz
Noise Reject: Reduces trigger sensitivity

Trigger Level Range

CH1,CH2: ?8 divisions from center of screen
EXT:
?1.2V EXT/5: ?6V

Trigger Level Accuracy,
typical (Accuracy is for signals having rise and fall times
20ns)

CH1,CH2: ?(0.3div?V/div) (within ?4 divisions from center of screen)

EXT: ?(6% of setting 40mV)
EXT/5:
?(6% of setting 200mV)

Holdoff Range

100ns-10s

Trigger Type

Edge

Trigger on the rising or falling edge

Pulse Width

Trigger (when >,<,=,) on positive or negative pulses
Pulse Width Range: 20ns-10s

Video

Trigger on an NTSC, PAL, or SECAM standard video signal
Line Range: 1-525 (NTSC), 1-625 (PAL/SECAM)

Slope

Trigger (when >,<,=,) on a positive or negative slope
Set Time: 20ns
10s

Overtime

from the rising or falling edge
Set Time: 20-10s

Alternate

Internal trigger on edge, pulse width, video or slope

Measurement

Cursors

Manual: The difference between voltage cursors V; the difference between time cursors T; 1/T calculated by Hz.
Tracing: The voltage and time at a waveform point;

Automatic(32)

Frequency, Period, Mean, Pk-Pk, Cycli RMS, Minimum, Maximum, Rise time, Fall Time, Pulse Width, -Pulse Width, Delay1-2Rise, Delay1-2Fall, Duty, -Duty, Vbase, Vtop, Vmid, Vamp, Overshoot, Preshoot, Preiod Mean, Preiod RMS, FOVShoot, RPREShoot, BWIDTHFRFFFRLRRLRFLFRLFF

Display

Type

Right angle 7"TFT 16-digit color LCD

Resolution

800*480 dots

Contrast

16 gears, with the progress bar to show adjustment

Interface

USB host and USB slave

Power Supply

Voltage

100-120VACRMS(?10%)45Hz to 440HzCAT
120-240VACRMS(
?10%)45Hz to 66HzCAT

Power

<30W

Fuse

2A, T rating, 250V

Mechanical

Size

Length: 313mm Width: 108mm Height: 142mm

Weight

2.08KG (exclusive of packing and accessories)


Accessories:


 

Other Pictures:

 

Copyright (c) 2006 hantek.com.cn All rights reserved