Product Category
Current Location:Home > Product Details>HSA2016 SeriesProduct Details

HSA2016 Series

Frequency range :9KHz~1.6GHz;
Optimal sensitivity: -161dBm;
RBW:10Hz to 1MHz.
High protection portable design, sturdy and durable
can be used in laboratory, more suitable for field mobile use
built-in large capacity lithium battery, can work for more than 4 hours. 18650 rechargeable battery.
USB/LAN communication, easy for long-range control.
5.6 inch highlight color display, 640*480 resolution, waveform display clearly.

Features

  • Frequency range: 9KHz-1.6GHz (tunable to 9KHz) AC Coupled
  • Optimal sensitivity: -161dBm   RBW:10Hz to 1MHz
  • IP-51 High protection portable design, sturdy and durable, can be used in laboratory, more suitable for field mobile use.
  • built-in large capacity lithium battery, can work for more than 4 hours. 18650 rechargeable battery.
  • 5.6 inch highlight color display, 640*480 resolution, waveform display clearly.
  • HSA2000 Series spectrum analyzer has the lowest DANL and SSB phase noise, and narrowest RBW. It greatly enhances the recognition ability to the spurious signal and noise signal.
  • Optional FM/AM modulation analysis, including carrier power, modulation rate, AM depth/FM deviation, SINAD and carrier frequency offset.
  • Standard spectrum feature. It can analyze the signal time stability, and find out lacunar signal in communication system accurately.
  • Strong field strength test function, fit for the test work in transmitter, base station and the antenna coverage site. It can show the density of field strength or power. The user could also calibrate gain or loss by using amplitude offset function.
  • HAS2000 Series has least RBW in the same level of analyzers, and can easily confirm, distinguish and measure two similar signals.
  • The 5.7 inch highlight color display can provide accurate, bright and clear trace both inside and outside, no need to move to shading place for work.
  • Short scanning time. It can fast catch the data and help to locate and recognize the irregular transient disturbance signal, and then optimize the testing time and accuracy.
  • Advanced built-in battery management system is adopted. Standard super large capacity-7800mAh lithium battery, and support 6 packs of 18650 battery pack which can keep measurement working in site for over 4 hours.
  • Firm and tight mechanical structure, close rubber sleeve pack, which is fit for harsh site work environment.
  • Integration USB Host & Device, support USB flash disk memory, optional WIFI/LAN, which is convenient for networking and long-range control.
  • Its PC software can achieve the management and storage of testing data.
  • HSA2000 Series site measurement application.
  1. Aerospace and Defense: Radio and Radar, interferometric analysis, site repairment.
  2. Wireless service provider: interferometric analysis, site repairmen.
  3. TV & Radio: interferometric analysis, check of channel power.
  4. Spectrum management agency: spectrum monitor.


  




RBW low to 10Hz 2

DANL low to -161dBm 6

 0span test time signal 1

SSB phase noise is normalized to -92dBc 6

PC software

Parameters

Model

HSA2016A

HSA2016B

Frequency

Frequency Range

9KHz~1.6GHz AC Coupled

9KHz~1.6GHz AC Coupled 5M~1.6GHz TG

Frequency Resolution

1Hz

Reference Frequency

10MHz

Frequency Readout Accuracy

±(frequency indication*frequency reference uncertainty+1%*span+20%RBW+marker resolution+1Hz)

Internal 10MHz Reference

Accuracy

Aging rate

±1ppm/year0~50Reference is 25

Temperature stability

±1ppm/year

Marker Resolution

(Frequency span)/(number of sweep points-1)

Resolution BandwidthRBW

-3dB Bandwidth

10Hz to 1MHz1-3-10 sequence

Accuracy

±5%  RBW=10Hz~1MHz nominal

Resolution Filter Shape Factor

5:1 nominal 

Video BandwidthVBW

-3dB bandwidth

1Hz to 1MHz1-3-10 sequence

 Accuracy

±10% VBM=1Hz~1MHz nominal

Displayed Average Noise Level (normalized to1Hz)

9K~1MHz

Preamp off

-108dBmtypical -127dBm

1MHz ~10MHz

-128dBmtypical -146dBm

10MHz ~500MHz

-142dBmtypical -146dBm

500MHz ~2.5GHz

-141dBmtypical -145dBm

2.5GHz ~3GHz

-140dBmtypical -144dBm

9K~1MHz

Preamp on

-131dBmtypical -150dBm

1MHz ~10MHz

-148dBmtypical -163dBm

10MHz ~500MHz

-161dBmtypical -164dBm

500MHz ~2.5GHz

-159dBmtypical -162dBm

2.5GHz ~3GHz

-158dBmtypical -161dBm

SSB Phase Noise

Carrier Offset(20~

30℃,500MHz

Central Frequency

10K

< -92 dBc/Hz, typical -95 dBc/Hz

30K

< -93 dBc/Hz, typical -96 dBc/Hz

100K

< -95 dBc/Hz, typical -97 dBc/Hz

1MHz

< -117 dBc/Hz, typical -119 dBc/Hz

Sweep Time

Range

Span >100Hz

2ms to 1000s

Span=0Hz

600ns to 200s

Sweep Mode

Continuous, single

Trigger Source

Free run; video; external

Trigger slope

Selectable positive or negative edge

Trigger delay

Span =0Hz

±12ms to ±12s nominal

Frequency Counter

Counter Resolution

1Hz

Accuracy

± (marker frequency × frequency reference uncertainty + counter resolution)

Level Display Range

Log Scale and Units

1 to 10 dB/divisions in 1, 2, 5, 10 dB steps, 10 divisions displayed

Linear Scale and Units

0 to 100%10 divisions displayed

Scale Unit

dBmdBmV,dBuV,WattsVolts

Sweep (Trace) Points

461

Number of Markers

4

Detectors

Normal, positive peak, dample, negative peak, RMS

Number of Traces

4

Trace Functions

Clear/write, maximum hold, minimum hold, average, checkclose

Level Measurement Error

±1.5dB(excluding input VSWR mismatch)  

20~30℃,peak detector, preamplifier off, input signal -50dBm to 0dBm

Reference Level

Setting Range

-100dBm to +30dBm, steps of 1dB

Setting Resolution

Log scale

0.01dB

Linear scale

Almost log2.236μV to 7.07V

Amplitude

Maximum Safety Input Level

Average continuous power

+33dBm

DC input voltage

50Vdc

Measurement Range

9KHz~2MHz

Displayed average noise level (DANL) to +10dB

2MHz~3GHz

Displayed average noise level (DANL) to +20dB

Input attenuator range

0 to 51dB,1dB steps

Spurious Response

Second Harmonic DistortionSHI

<65dBc50MHz to 3GHzMixer level -30dBmattenuator =0dBpreamp off20~30

Third-Order

IntermodulationTOI

50~300MHz

+8dBmThird-order intermodulation products2 x -20dBm; frequency separation 100KHzattenuation = 0dB; preamp off20~30

300MHz~1.6GHz

+10dBm

Input Related Spurious

<-75dBc(input mixer = -30dBm)

Inherent Residual Response

<-90dBmtypical -98dBm (Input terminated and 0 dB RF attenuation, preamplifier off)

RF Input VSWR

(at Tuned Frequency)

10MHz to 1.6GHz

1.5:1, nominal         Attenuator setting 10~20dB

10MHz Reference/External Trigger Input

Reference Iinput Frequency

10MHz

Reference Input Amplitude

0~10dBm

Trigger Voltage

5V TTL level

Connector and Output Impendence

N female;(50Ω

Gennral Feature

Interface Language

EnglishChineseChinese Traditional

Display Index

5.7 inch640*480 resolution64M color LCD display

Temperature Range

Working

-10 to +50,(battery0 to 50

Storage

-40 to +70,(battery :-20 to 50

Relative Humidity

<95%

Weight

2.9kgwith battery),2.6kgwithout battery

Size

260m X 220m X 75m

Power

Input voltage range

DC: 12-17V, maximum 2.8A input  220VAC±15%

AC frequency range

40Hz to 60Hz

Power consumption

Maximum 32W







NumberAttachments TitleOperating
1HSA2016 ManualDownload

Copyright (c) 2006 hantek.com.cn All rights reserved