Product Category
Current Location:Home > Product Details>DPO6004B(C)/MPO6004D SeriesProduct Details

DPO6004B(C)/MPO6004D Series

The waveform capture rate of DPO6000/MPO6000 Fluorescent oscilloscope is up to 400,000 FPS.It has 256 grade color and color temperature display.Standard equipped with up to 16 kinds of trigger functions, 5 kinds of serial decoding functions.It supplies 200 MHz, 100 MHz and 80 MHz bandwidth, its memory depth is up to 64M,16 channels logic analyzer plug and use, all standard equipped with 2 channels waveform generator, standard equipped with touch screen. it is a useful commissioning instrument for various fields such as communication, aerospace, defense, embedded systems, computers, research and education.

★Six in one oscilloscope:4 channels oscilloscope+16 channels logic analyzer+2 channels waveform generator+digital voltmeter+serial protocol analyzer+FFT spectral analysis.

★60 000 wfms/s (dots display)/400,000 wfms/s (dots display quick acquisition mode)waveform capture rate.

★Segmented acquisition function,support to capture up to 80,000 sections.256 grade color display.

★Up to 16 kinds of trigger functions, including 5 kinds of protocol triggers.Supply 5 serial decoding option.

★1 GSa/s real-time sample rate of the analog channels; 64 Mpts standardmemory depth.

★2-channe signal source,13 kinds of waveforms inside,4 sets of arbitrary waveforms,200M sample rate,8Kpts waveform length.

★1 GSa/s real-time sample rate of the digital channels.

★200 MHz, 100 MHz and 80 MHz analog channel bandwidth.

★Low base noise, 500uV/div to 10 V/div ultra-wide vertical dynamic range.

★7 inch WVGA capacitive touch screen,(800*480) TFT , with ultra-wide screen, vivid picture, lowpower consumption and long service life.

★Auto measurement of 42 kinds of waveform parameters (with statistics).

★Bode diagram function(the oscilloscopes with signal source function can use).

★Multiple waveform math operation functions【MATH】.Event search function.

★Standard interfaces: USB Device, USB Host, LAN,Optional interfaces: HDMI ,UART

★Conform to LXI CORE 2011 DEVICE class instrument standards; enable quick,economic and efficient creation and reconfiguration of test system.Supports remote command control.

Model

 4-channel oscilloscope+2CH AFG + 16CH LA                    Digital fluorescence display and color temperature display

    

Bode diagram function                                                        256 grade color display 

    

 2-channel 25M waveform/Arb generator                                Waveform capture rateup to 400,000

    

 FFT function Scales show                                                       Segmented acquisition and history waveform

    

16-channel digital channel                                               64M memory depth

    

7 inch capacitive touch screen                                          5 bits digital voltage meter , 6 bits frequency indicator 

    

FFT function

Parameters

Oscilloscope function
Acquisition Real-time sample rate 1 GSa/s(single channel) 500 MSa/s(two channels)
250 MSa/s(three/four channels);
Note:digital channel 12,34 open at the same time,it is considered as one channel
Peak detection Analog channel 4ns
Note:digital channels don’t support
Average mode Analog channel

All channels reach N time samples at the same time,N can be selected from 

2、4、8、16、32、 64、128、256、512 and 1024.

Note:digital channels don’t support
High resolution Up to 12bit
Note:digital channels don’t support
Minimum test pulse width 8ns
Memory depth Single channel 64M
Two channels 32M
Three,four channels 16M
Input Channel quantity 4 analog channels 
Note:data channels can’t be opened
3 analog channels
Note:digital channel LA1/LA2/LA3/LA4/LA1LA2/LA3LA4
2 analog channels
Note:digital channels infinitize
1 analog channel
Note:digital channels infinitize
0 analog channel
Note:digital channels infinitize
Input coupling DC、AC or GND
Note:digital channels don’t support
Input impedance,DC coupling Analog channel
25pF±3 pF,1MΩ±2%
Digital channel
(300KΩ±2%) ,(8 pF±3 pF)
Supported probe attenuation  factor Analog channel 1X、10X、100X、1000X
Voltage classes 300V CAT II
Maximum input voltage Analog channel 300VRMS (10X)
Digital channel -25V~25V
Horizontal Waveform interpolation (sin x)/x
Maximum record length Single channel maximum 64M
Two channels maximum32M
three/four channels maximum 16M
Horizontal scale range DSO6084 DSO6104
2ns/div~100s/div  1, 2, 5 step by step
Time base mode Y-T、X-Y、Roll 
X-Y number Channel 1,2 1 XY channel、channel3 4 1 XY channel
Zero offset ±0.5 div× minimum time base gear
Sample Rate and ±25ppm
Delay Time Accuracy
Clock drifting ≤±5 ppm/year
Delta Time Measurement single,“acquisition”mode
Accuracy
(Full Bandwidth) ±(1 sample interval+100ppm×reading+0.6ns)
>16 times averages
±(1 sample interval+100ppm×reading+0.4ns)
Sample interval=sec/div÷200
Vertical Bandwidth(-3db) 6084 6104 6204
80MHz 100MHz 200MHz
Vertical resolution Analog channel 8bit
Digital channel 1bit
Vertical scale range nput BNC position is 500μV/div~10V/div 
Position range 500μV/div to 120mV/div,±1V
122mV/div to 1.2V/div,±10V
1.22V/div to 10V/div,±50V
Optional analog bandwidth limitation Typical 20MHz
Bass response(-3db) In BNC position is≤10Hz
Rising time in BNC position,typical 6084 6104 6204
≤4.4ns ≤3.5ns ≤1.8ns
Vertical gain accuracy

In “normal” or “average” acquisition mode,the accuracy o

f 10V/div to 10mV/div is ±3%

In “normal” or “average” acquisition mode,the accuracy of 

5mV/div to 500uV/div is ±4%.

DC offset accuracy ±0.1 div±2 mV±1% offset value
The isolation of channels   DC maximum bandwidth:>40 dB
Note: Bandwidth reduced to 6MHz when using a 1X probe
Trigger Trigger level range  ±5 divisions from the center of the screen
Trigger mode auto、general、single
Level CH1~CH4 ±4 divisions from the center of the screen
Holdoff range 8ns~10s
Trigger level accuracy CH1~CH4

0.2 div×volts/div within ±4 divisions

 from the center of the screen

Edge trigger Slope Rising edge,falling edge,rising or falling edge
Signal source CH1~CH4,
D1.0~D1.3,
D2.0~D2.3,
D3.0~D3.3,
D4.0~D4.3
Pulse width trigger Polarity Positive polarity,negative polarity
Condition(When) <,>, !=, =
Signal source CH1~CH4,
D1.0~D1.3,
D2.0~D2.3,
D3.0~D3.3,
D4.0~D4.3
Pulse width range 8ns ~ 10s
Video trigger Signal standard NTSC, PAL
Signal source CH1~CH4
Synchronization Scanning line、line number、odd field、even field、all field
Slope trigger Slope rise,fal
condition(When) <,>, !=, =
Signal source CH1 ~ CH4
Time range 8ns ~ 10s
Overtime trigger Signal source CH1~CH4,
D1.0~D1.3,
D2.0~D2.3,
D3.0~D3.3,
D4.0~D4.3
Polarity Positive polarity,negative polarity
Time range 8ns ~ 10s
Window trigger Signal source CH1~CH4LA1~LA4
Pattern trigger Pattern 0:low level;1:high level;X:ignore;
Level(signal source) CH1~CH4
Interval trigger Slope rise,fall
condition(When) <,>, !=, =
Signal source CH1~CH4,
D1.0~D1.3,
D2.0~D2.3,
D3.0~D3.3,
D4.0~D4.3
Time rangeTime range 8ns ~ 10s
Delay trigger Edge type Rising edge,falling edge
Signal source CH1~CH4
condition(When) <,>, !=, =
Time range 8ns ~ 10s
Set up hold trigger Edge type Rising edge,falling edge
Signal source CH1~CH4
condition(When) <,>, !=, =
Time range 8ns ~ 10s
Runt trigger Polarity Positive polarity,negative polarity
Condition(When) <,>, !=, =
Signal source CH1~CH4
Time range 8ns ~ 10s
UART trigger condition(When) start、stop、data、odd-even check、reception error
Signal source(RX/TX) CH1~CH4,
D1.0~D1.3,
D2.0~D2.3,
D3.0~D3.3,
D4.0~D4.3
Data format Hex(hexadecimal)
Data length 1 byte
Data bit width 5 bit, 6 bit, 7 bit, 8 bit
Odd-even check none、odd、even
Free level high、low
Baud rate (optional)

110/300/600/1200/2400/4800/9600/14400/19200/38400/57600

/115200/230400/380400/460400 bit/s

Baud rate(user-defined) 300bit/s~334000bit/s
LIN trigger condition(When)

Interval field、synchronization field、ID field、synchronization error

、identifier、IDand data

Signal source CH1~CH4,
D1.0~D1.3,
D2.0~D2.3,
D3.0~D3.3,
D4.0~D4.3
Data format Hex(hexadecimal)
Baud rate(optional)

110/300/600/1200/2400/4800/9600/14400/19200/38400/57600

/115200/230400/380400/460400 bit/s

Baud rate(user-defined) 300bit/s~334000bit/s
CAN trigger condition(When) Start bit、remote frame ID、data frame ID、frame ID、remote frame data、data frame data、wrong frame、all errors、answer error、overload frame
Signal source CH1~CH4
Data format Hex(hexadecimal)
Baud rate(optional) 10000, 20000, 33300, 500000, 62500, 83300, 100000, 125000, 250000, 500000, 800000, 1000000
Baud rate(user-defined) 5kbit/s~1Mbit/s  
SPI trigger Signal source CH1~CH4,
D1.0~D1.3,
D2.0~D2.3,
D3.0~D3.3,
D4.0~D4.3
Data format Hex(hexadecimal)
Data bit width 4, 8, 16, 24, 32
IIC trigger Signal source (SDA/SCL) CH1~CH4,
D1.0~D1.3,
D2.0~D2.3,
D3.0~D3.3,
D4.0~D4.3
Data format Hex(hexadecimal)         
Data index 0~7
opportunity(condition) Start bit、stop bit、no response、address、data、restart
Measurement cursor Voltage difference between cursors △V
Time difference between cursors △T
Reciprocal of △T,in Hertz(1/△T)
Auto measurement frequency、period、mean、peak-to-peak、RMS、minimum、mixmum、rising time、falling time、+ width、- width、base、top、middle、amplitude、overshoot、preshoot、rising edge phase difference、falling edge phase difference、+ duty、- duty、period mean、PRMS、FOVshoot、ROVshoot、BWIDTH、FRF、FFR、LRR、LRF、LFR、LFF
DVM Data source CH1,CH2,CH3,CH4
Measurement type DC effective value
AC effective value
DC
Frequency meter hardware 6 bits frequency meter
Arbitrary waveform generator
Arbitrary waveform generator(for oscilloscopes with signal source channels) Channel number 2channels
Sample rate 200MSa/s
Vertical resolution 12 bits 
Maximum frequency 25 MHz 
Standard waveforms sin、square、pulse、triangular,noise、DC
Sinc、index、semi-distortion、lorentz,dual tone multiple frequency,gauss,ECG
Arbitrary waveform Arb1,Arb2,Arb3,Arb4
Sin Frequency range 0.1Hz~25MHz
square/pulse Frequency range 0.1Hz~10MHz
triangular wave Frequency range 0.1Hz~1MHz
Sampling wave Frequency range 0.1Hz~1MHz
Index Frequency range 0.1Hz~5MHz
Semi-distortion Frequency range 0.1Hz~1MHz
lorentz Frequency range 0.1Hz~1MHz
Dual tone multiple frequency Frequency range 0.1Hz~1MHz
Gauss Frequency range 0.1Hz~1MHz
ECG Frequency range 0.1Hz~1MHz
Arbitrary wave Frequency range 0.1 Hz to 10 MHz 
Waveform length 8KSa
Frequency accuracy 100 ppm(<10 kHz) 50 ppm(>10 kHz)
resolution 0.1 Hz or 4 bits,take the greater one
Amplitude Output range 10mV~7Vp-p(high impedance)
5mV~3.5Vp-p(50Ω)
DC offset range ±3.5 V,high impedance
±1.75 V,50 Ω
resolution 100 μV or 3 bits,take the greater one
accuracy  2%(1 kHz)
Output impedance 50 Ω
Logic analyzer
Logic analyzer Input impedance,DC coupling Digital channel
(300KΩ±2%) ,(8 pF±3 pF)
Threshold value 4 channels in 1 group adjustable threshold value
Threshold option TTL(1.4 V) 
5.0 V CMOS(+2.5 V) 
3.3 V CMOS(+1.65 V)
2.5 V CMOS(+1.25 V) 
1.8 V CMOS(+0.9 V)
ECL(-1.3 V) 
PECL(+3.7 V)
LVDS(+1.2 V) 
0V 
User-defined 
Threshold range  ±7.0V,10mV step by step
Threshold accuracy ±(100mV+3% threshold setting) 
Dynamic range ±5.0V+ threshold
Minimum voltage swing  500 mVpp
Vertical resolution  1 bit
General specifications
Display Display type 7"TFT  diagonal liquid crystal
Display resolution 800(horizontal)*480(vertical)pixels
Display colour 16 million colours(24 bits true colour)
Persistence time minimum、1 s、5 s、10 s、30S、infinite
Display type dot、vector
Display mode Color temperature,gray scale
Display brightness adjustable
Grid type adjustable
Grid brightness adjustable
Interface Standard interface USB Host,USB Device,LAN, EDU signal WIFI
Aux(trigger output/PassFail )--only EDU with this interface
Optional interface PassFail
UART
HDMI
General specifications Probe compensator output
Output voltage ,typical about 2Vpp input≥1MΩ load
frequency、typical 1kHz
Power supply 100-120VACRMS(±10%),45Hz to 440Hz,CATⅡ
120-240VACRMS(±10%),45Hz to 66Hz,CATⅡ
Power consumption <30W
Fuse T,3.15A,250V,5x20mm
Operating temperature 0~50 °C (32~122 °F)
Storage temperature -40~+71 °C (-40~159.8 °F)
Humidity ≤+104℉(≤+40°C): ≤90% relative humidity
106℉~122℉ (+41°C ~50°C): ≤60% relative humidity
Cooling method convection
Altitude Operating and nonoperating 3,000m(10,000 feet)
Mechanical shock Random vibration 0.31 g RMS from 50Hz to 500Hz,
10 minutes on each axis
Nonoperating 2.46g RMS from 5Hz to 500Hz,
10 minutes on each axis
Operating 50g,11ms,half-sine wave
Mechanical Size 318 x 140 x 150mm(length x width x height)
Weight 2900g

Oscilloscope function
Acquisition Real-time sample rate 1 GSa/s(single channel) 500 MSa/s(two channels)
250 MSa/s(three/four channels);
Note:digital channel 12,34 open at the same time,it is considered as one channel
Peak detection Analog channel 4ns
Note:digital channels don’t support
Average mode Analog channel

All channels reach N time samples at the same time,N can be selected from 

2、4、8、16、32、 64、128、256、512 and 1024.

Note:digital channels don’t support
High resolution Up to 12bit
Note:digital channels don’t support
Minimum test pulse width 8ns
Memory depth Single channel 64M
Two channels 32M
Three,four channels 16M
Input Channel quantity 4 analog channels 
Note:data channels can’t be opened
3 analog channels
Note:digital channel LA1/LA2/LA3/LA4/LA1LA2/LA3LA4
2 analog channels
Note:digital channels infinitize
1 analog channel
Note:digital channels infinitize
0 analog channel
Note:digital channels infinitize
Input coupling DC、AC or GND
Note:digital channels don’t support
Input impedance,DC coupling Analog channel
25pF±3 pF,1MΩ±2%
Digital channel
(300KΩ±2%) ,(8 pF±3 pF)
Supported probe attenuation  factor Analog channel 1X、10X、100X、1000X
Voltage classes 300V CAT II
Maximum input voltage Analog channel 300VRMS (10X)
Digital channel -25V~25V
Horizontal Waveform interpolation (sin x)/x
Maximum record length Single channel maximum 64M
Two channels maximum32M
three/four channels maximum 16M
Horizontal scale range DSO6084 DSO6104
2ns/div~100s/div  1, 2, 5 step by step
Time base mode Y-T、X-Y、Roll 
X-Y number Channel 1,2 1 XY channel、channel3 4 1 XY channel
Zero offset ±0.5 div× minimum time base gear
Sample Rate and ±25ppm
Delay Time Accuracy
Clock drifting ≤±5 ppm/year
Delta Time Measurement single,“acquisition”mode
Accuracy
(Full Bandwidth) ±(1 sample interval+100ppm×reading+0.6ns)
>16 times averages
±(1 sample interval+100ppm×reading+0.4ns)
Sample interval=sec/div÷200
Vertical Bandwidth(-3db) DPO6084 DPO6104 DPO6204
80MHz 100MHz 200MHz
Vertical resolution Analog channel 8bit
Digital channel 1bit
Vertical scale range nput BNC position is 500μV/div~10V/div 
Position range 500μV/div to 120mV/div,±1V
122mV/div to 1.2V/div,±10V
1.22V/div to 10V/div,±50V
Optional analog bandwidth limitation Typical 20MHz
Bass response(-3db) In BNC position is≤10Hz
Rising time in BNC position,typical DPO6084 DPO6104 DPO6204
≤4.4ns ≤3.5ns ≤1.8ns
Vertical gain accuracy

In “normal” or “average” acquisition mode,the accuracy o

f 10V/div to 10mV/div is ±3%

In “normal” or “average” acquisition mode,the accuracy of 

5mV/div to 500uV/div is ±4%.

DC offset accuracy ±0.1 div±2 mV±1% offset value
The isolation of channels   DC maximum bandwidth:>40 dB
Note: Bandwidth reduced to 6MHz when using a 1X probe
Trigger Trigger level range  ±5 divisions from the center of the screen
Trigger mode auto、general、single
Level CH1~CH4 ±4 divisions from the center of the screen
Holdoff range 8ns~10s
Trigger level accuracy CH1~CH4

0.2 div×volts/div within ±4 divisions

 from the center of the screen

Edge trigger Slope Rising edge,falling edge,rising or falling edge
Signal source CH1~CH4,
D1.0~D1.3,
D2.0~D2.3,
D3.0~D3.3,
D4.0~D4.3
Pulse width trigger Polarity Positive polarity,negative polarity
Condition(When) <,>, !=, =
Signal source CH1~CH4,
D1.0~D1.3,
D2.0~D2.3,
D3.0~D3.3,
D4.0~D4.3
Pulse width range 8ns ~ 10s
Video trigger Signal standard NTSC, PAL
Signal source CH1~CH4
Synchronization Scanning line、line number、odd field、even field、all field
Slope trigger Slope rise,fal
condition(When) <,>, !=, =
Signal source CH1 ~ CH4
Time range 8ns ~ 10s
Overtime trigger Signal source CH1~CH4,
D1.0~D1.3,
D2.0~D2.3,
D3.0~D3.3,
D4.0~D4.3
Polarity Positive polarity,negative polarity
Time range 8ns ~ 10s
Window trigger Signal source CH1~CH4LA1~LA4
Pattern trigger Pattern 0:low level;1:high level;X:ignore;
Level(signal source) CH1~CH4
Interval trigger Slope rise,fall
condition(When) <,>, !=, =
Signal source CH1~CH4,
D1.0~D1.3,
D2.0~D2.3,
D3.0~D3.3,
D4.0~D4.3
Time rangeTime range 8ns ~ 10s
Delay trigger Edge type Rising edge,falling edge
Signal source CH1~CH4
condition(When) <,>, !=, =
Time range 8ns ~ 10s
Set up hold trigger Edge type Rising edge,falling edge
Signal source CH1~CH4
condition(When) <,>, !=, =
Time range 8ns ~ 10s
Runt trigger Polarity Positive polarity,negative polarity
Condition(When) <,>, !=, =
Signal source CH1~CH4
Time range 8ns ~ 10s
UART trigger condition(When) start、stop、data、odd-even check、reception error
Signal source(RX/TX) CH1~CH4,
D1.0~D1.3,
D2.0~D2.3,
D3.0~D3.3,
D4.0~D4.3
Data format Hex(hexadecimal)
Data length 1 byte
Data bit width 5 bit, 6 bit, 7 bit, 8 bit
Odd-even check none、odd、even
Free level high、low
Baud rate (optional)

110/300/600/1200/2400/4800/9600/14400/19200/38400/57600

/115200/230400/380400/460400 bit/s

Baud rate(user-defined) 300bit/s~334000bit/s
LIN trigger condition(When)

Interval field、synchronization field、ID field、synchronization error

、identifier、IDand data

Signal source CH1~CH4,
D1.0~D1.3,
D2.0~D2.3,
D3.0~D3.3,
D4.0~D4.3
Data format Hex(hexadecimal)
Baud rate(optional)

110/300/600/1200/2400/4800/9600/14400/19200/38400/57600

/115200/230400/380400/460400 bit/s

Baud rate(user-defined) 300bit/s~334000bit/s
CAN trigger condition(When) Start bit、remote frame ID、data frame ID、frame ID、remote frame data、data frame data、wrong frame、all errors、answer error、overload frame
Signal source CH1~CH4
Data format Hex(hexadecimal)
Baud rate(optional) 10000, 20000, 33300, 500000, 62500, 83300, 100000, 125000, 250000, 500000, 800000, 1000000
Baud rate(user-defined) 5kbit/s~1Mbit/s  
SPI trigger Signal source CH1~CH4,
D1.0~D1.3,
D2.0~D2.3,
D3.0~D3.3,
D4.0~D4.3
Data format Hex(hexadecimal)
Data bit width 4, 8, 16, 24, 32
IIC trigger Signal source (SDA/SCL) CH1~CH4,
D1.0~D1.3,
D2.0~D2.3,
D3.0~D3.3,
D4.0~D4.3
Data format Hex(hexadecimal)         
Data index 0~7
opportunity(condition) Start bit、stop bit、no response、address、data、restart
Measurement cursor Voltage difference between cursors △V
Time difference between cursors △T
Reciprocal of △T,in Hertz(1/△T)
Auto measurement frequency、period、mean、peak-to-peak、RMS、minimum、mixmum、rising time、falling time、+ width、- width、base、top、middle、amplitude、overshoot、preshoot、rising edge phase difference、falling edge phase difference、+ duty、- duty、period mean、PRMS、FOVshoot、ROVshoot、BWIDTH、FRF、FFR、LRR、LRF、LFR、LFF
DVM Data source CH1,CH2,CH3,CH4
Measurement type DC effective value
AC effective value
DC
Frequency meter hardware 6 bits frequency meter
Arbitrary waveform generator
Arbitrary waveform generator(for oscilloscopes with signal source channels) Channel number 2/3channels
Sample rate 200MSa/s
Vertical resolution 12 bits 
Maximum frequency 25 MHz 
Standard waveforms sin、square、pulse、triangular,noise、DC
Sinc、index、semi-distortion、lorentz,dual tone multiple frequency,gauss,ECG
Arbitrary waveform Arb1,Arb2,Arb3,Arb4
Sin Frequency range 0.1Hz~25MHz
square/pulse Frequency range 0.1Hz~10MHz
triangular wave Frequency range 0.1Hz~1MHz
Sampling wave Frequency range 0.1Hz~1MHz
Index Frequency range 0.1Hz~5MHz
Semi-distortion Frequency range 0.1Hz~1MHz
lorentz Frequency range 0.1Hz~1MHz
Dual tone multiple frequency Frequency range 0.1Hz~1MHz
Gauss Frequency range 0.1Hz~1MHz
ECG Frequency range 0.1Hz~1MHz
Arbitrary wave Frequency range 0.1 Hz to 10 MHz 
Waveform length 8KSa
Frequency accuracy 100 ppm(<10 kHz) 50 ppm(>10 kHz)
resolution 0.1 Hz or 4 bits,take the greater one
Amplitude Output range 10mV~7Vp-p(high impedance)
5mV~3.5Vp-p(50Ω)
DC offset range ±3.5 V,high impedance
±1.75 V,50 Ω
resolution 100 μV or 3 bits,take the greater one
accuracy  2%(1 kHz)
Output impedance 50 Ω
Logic analyzer
Logic analyzer Input impedance,DC coupling Digital channel
(300KΩ±2%) ,(8 pF±3 pF)
Threshold value 4 channels in 1 group adjustable threshold value
Threshold option TTL(1.4 V) 
5.0 V CMOS(+2.5 V) 
3.3 V CMOS(+1.65 V)
2.5 V CMOS(+1.25 V) 
1.8 V CMOS(+0.9 V)
ECL(-1.3 V) 
PECL(+3.7 V)
LVDS(+1.2 V) 
0V 
User-defined 
Threshold range  ±7.0V,10mV step by step
Threshold accuracy ±(100mV+3% threshold setting) 
Dynamic range ±5.0V+ threshold
Minimum voltage swing  500 mVpp
Vertical resolution  1 bit
General specifications
Display Display type 7"TFT  diagonal liquid crystal
Display resolution 800(horizontal)*480(vertical)pixels
Display colour 16 million colours(24 bits true colour)
Persistence time minimum、1 s、5 s、10 s、30S、infinite
Display type dot、vector
Display mode Color temperature,gray scale
Display brightness adjustable
Grid type adjustable
Grid brightness adjustable
Interface Standard interface USB Host,USB Device,LAN, EDU signal WIFI
Aux(trigger output/PassFail )--only EDU with this interface
Optional interface PassFail
UART
HDMI
General specifications Probe compensator output
Output voltage ,typical about 2Vpp input≥1MΩ load
frequency、typical 1kHz
Power supply 100-120VACRMS(±10%),45Hz to 440Hz,CATⅡ
120-240VACRMS(±10%),45Hz to 66Hz,CATⅡ
Power consumption <30W
Fuse T,3.15A,250V,5x20mm
Operating temperature 0~50 °C (32~122 °F)
Storage temperature -40~+71 °C (-40~159.8 °F)
Humidity ≤+104℉(≤+40°C): ≤90% relative humidity
106℉~122℉ (+41°C ~50°C): ≤60% relative humidity
Cooling method convection
Altitude Operating and nonoperating 3,000m(10,000 feet)
Mechanical shock Random vibration 0.31 g RMS from 50Hz to 500Hz,
10 minutes on each axis
Nonoperating 2.46g RMS from 5Hz to 500Hz,
10 minutes on each axis
Operating 50g,11ms,half-sine wave
Mechanical Size 318 x 140 x 150mm(length x width x height)
Weight 2900g

DPO6004B Series:

 







DPO6004C Series






 


MPO6004D Series






 



NumberAttachments TitleOperating
1DPO6000&MPO6000 SoftwareDownload
2DPO6000&MPO6000 ManualDownload
3DPO6000&MPO6000 DriverDownload

Copyright (c) 2006 hantek.com.cn All rights reserved