±3%
for Normal or Average acquisition mode, 5V/div to 10mV/div;
±4% for Normal or Average acquisition mode, 5mV/div to 2mV/div
Trigger System
Trigger Types
Edge,
Video, Pulse, Slope, Over time, Alternative
Trigger Source
CH1,
CH2, EXT, EXT/5, AC Line
Trigger Modes
Auto,
Normal, Single
Trigger Sensitivity
(Edge Trigger Type)
DC(CH1,CH2,CH3,CH4):
1div from DC to 10MHz; 1.5div from 10MHz to 100MHz; 2div from 100MHz to
Full;
AC: Attenuates signals below 10Hz ;
HF Reject: Attenuates signals above 80kHz;
LF Reject: Same as the DC-coupled limits for frequencies above 150kHz;
attenuates signals below 150kHz
Trigger Level Range
CH1,
CH2,(CH3, CH4): ±8 divisions from center of screen;
EXT: ±1.2V;
EXT/5:±6V
Trigger Level Accuracy
CH1,
CH2,(CH3, CH4): 0.2div × volts/div within ±4 divisions from center of
screen;
EXT: ± (6% of setting + 40mV);
EXT/5: ± (6% of setting + 200mV);
Holdoff Range
100ns-10s
Measurement
Cousor Measurement
Manual:
Voltage difference between cursors: △V Time difference between
cursors: △T Reciprocal of △T in Hertz (1/ΔT);
Tracing: The valtage and time at a waveform point;
2 CH oscilloscope 1 CH 25MHz waveform generator 5 kinds of serial protocol trigger and decode 32 kinds of auto measurements with statistics SCPI remote control 2 sets of DVM
Oscilloscope + waveform generator 7'' High resolution(800x480); 64K memory depth, USB Host/Device, Support U-disk memory, systom update DVM digital DMM, Auto range
